Carl Valentin Compa II

Modular structure for high versatility

  • Large label rolls up to a diameter of 200 mm

  • Print speed up to 200 mm/s

  • Simplest operating and maintenance ability

  • Standard LAN, USB, serial and parallel interfaces

  • Optional WLAN interface (Warning! Cannot be retrofitted: It is to be indicated for new orders.)

Modular structure for high versatility 

The optimal matching of transfer ribbon, label and pressure power enable the Compa II to print onto type plates, adhesive labels, paper, cardboard, textile and plastic. Fast and easily suitable labels with an abrasion, weather and chemical resistant printout can be obtained. A lifelong identification of your product and traceability with the aid of serial numbers is guaranteed. The Requirements of a reliable labelling e.g. for the automobile industry are guaranteed.

 

The ultimate ambition with the development was the simple and comfortable handling as well as high reliability - also in harsh environments. Housing and print mechanics are perfectly coordinated and manufactured from high quality materials. Each specific customer requirement is realised with the extensive periphery and software.

Accessories
Additional toroidal 75 mm CPL for unwinder
7215060

For the use of 75 mm cardboard core instead of 40 mm (standard).

Pneumatica applicator,
max. cylinder stroke 300 mm
9252500B

Applicator unit to stamp on, blow on and roll on of labels.

Pneumatica applicator,
max. cylinder stroke 400 mm
9252502B

Applicator unit to stamp on, blow on and roll on of labels.

Connection set for rewinder and unwinder
9266090

For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.

Cutter unit "Rotation" for Compa II 10x
9052860

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

Cutter unit "Rotation" for Compa II 162
9052960

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

Cutter unit with antistatic brush Compa II 162
9052966

The rotary cutter with antistatic brush permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

Cutter unit with antistatic brush Compa II 1ox
9052866

The rotary cutter with antistatic brush permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

Dispenser inputs/outputs
9052785B

​With a maximum of 16 control inputs and outputs, different functions of the printer can be released and operating conditions be shown.

Dispensing edge extended with photocell for Compa II 10x
9052850B

Only in connection with a dispenser unit.

If labels are difficult to remove from the liner, then this extended dispensing edge is used.

Label bowl for Compa II 10x
9052865

​Receptacle for labels that are cut after printing.

Footswitch with protection cover
9052795B

​With the foot switch connected to the dispenser inputs/outputs, the print start can be released.

Label bowl for Compa II 162
9052962

Receptacle for labels that are cut after printing.

Photocell dispenser unit
9052750B

The dispensing unit is controlled by a manual switch, foot switch or an external control signal.

Product sensor Reflexion
9052796B

With the product sensor connected to the dispenser inputs/outputs, the print start can be released.

Rewinder plate for Compa II 10x
9052872

Only for printers with dispenser

For rewinding labels internally despite the installed dispenser

Rewinder plate for Compa II 162
9052972

Only for printers with dispenser

For rewinding labels internally despite the installed dispenser

Internal rewinder for Compa II 10x thermal transfer version
9052870A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

Internal rewinder for Compa II 10x thermal version
9052875A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

Internal rewinder for Compa II 162 thermal transfer version
9052970A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

Internal rewinder for Compa II 162 thermal version
9052975A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

Internal rewinder for Compa II 162 thermal version
9052975A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

Label rewinder PR 10
9252100

PR 10 for rewinding the labels after printing

Max external diameter of label roll: 210 mm

Max label width: 120 mm (for Compa II 10X)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

Label rewinder PR 12
9252120

PR 12 for rewinding the labels after printing

Max external diameter of label roll: 300 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

The rewinder has its own power supply.

Label rewinder PR 15
9252200

PR 15 for rewinding the labels after printing

Max external diameter of label roll: 210 mm

Max label width: 180 mm (for Compa II 162)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

Label rewinder PR 17
9252200

PR 17 for rewinding the labels after printing

Max external diameter of label roll: 300 mm

Max label width: 180 mm (for Compa II 162)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

The rewinder has its own power supply.

Signal lamp
9052790B

For displaying the current printer status.

Label unwinder PA 50A
9266050A

PA 50A for unwinding large label rolls

Max external diameter of label roll: 300 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

WLAN
9052780B

WLAN card 802.11b/g WEP/WPA PSK (TKIP)

(Warning! Cannot be retrofitted: It is to be indicated for new orders.)

© 2017 par REDEMAC INC.

  • LinkedIn Social Icon
  • YouTube
  • Facebook Social Icon
  • Instagram