REDEMAC Inc
Carl Valentin Compa II
Modular structure for high versatility
-
Large label rolls up to a diameter of 200 mm
-
Print speed up to 200 mm/s
-
Simplest operating and maintenance ability
-
Standard LAN, USB, serial and parallel interfaces
-
Optional WLAN interface (Warning! Cannot be retrofitted: It is to be indicated for new orders.)
Modular structure for high versatility
The optimal matching of transfer ribbon, label and pressure power enable the Compa II to print onto type plates, adhesive labels, paper, cardboard, textile and plastic. Fast and easily suitable labels with an abrasion, weather and chemical resistant printout can be obtained. A lifelong identification of your product and traceability with the aid of serial numbers is guaranteed. The Requirements of a reliable labelling e.g. for the automobile industry are guaranteed.
The ultimate ambition with the development was the simple and comfortable handling as well as high reliability - also in harsh environments. Housing and print mechanics are perfectly coordinated and manufactured from high quality materials. Each specific customer requirement is realised with the extensive periphery and software.
Accessories
Pneumatica applicator,
max. cylinder stroke 300 mm
9252500B
Applicator unit to stamp on, blow on and roll on of labels.
Pneumatica applicator,
max. cylinder stroke 400 mm
9252502B
Applicator unit to stamp on, blow on and roll on of labels.
Connection set for rewinder and unwinder
9266090
For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.
Cutter unit "Rotation" for Compa II 10x
9052860
The rotary cutter permits cutting of labels up to 200 g/m².
Single cut, interval cut and final cut can be selected.
Cutter unit "Rotation" for Compa II 162
9052960
The rotary cutter permits cutting of labels up to 200 g/m².
Single cut, interval cut and final cut can be selected.
Cutter unit with antistatic brush Compa II 162
9052966
The rotary cutter with antistatic brush permits cutting of labels up to 200 g/m².
Single cut, interval cut and final cut can be selected.
Cutter unit with antistatic brush Compa II 1ox
9052866
The rotary cutter with antistatic brush permits cutting of labels up to 200 g/m².
Single cut, interval cut and final cut can be selected.
Dispenser inputs/outputs
9052785B
With a maximum of 16 control inputs and outputs, different functions of the printer can be released and operating conditions be shown.
Dispensing edge extended with photocell for Compa II 10x
9052850B
Only in connection with a dispenser unit.
If labels are difficult to remove from the liner, then this extended dispensing edge is used.
Label bowl for Compa II 10x
9052865
Receptacle for labels that are cut after printing.
Footswitch with protection cover
9052795B
With the foot switch connected to the dispenser inputs/outputs, the print start can be released.
Label bowl for Compa II 162
9052962
Receptacle for labels that are cut after printing.
Photocell dispenser unit
9052750B
The dispensing unit is controlled by a manual switch, foot switch or an external control signal.
Rewinder plate for Compa II 10x
9052872
Only for printers with dispenser
For rewinding labels internally despite the installed dispenser
Internal rewinder for Compa II 10x thermal transfer version
9052870A
For rewinding small label rolls after printing inside the printer.
In dispensing mode, for rewinding the liner.
Max external diameter of label roll: 145 mm
Label winding: outside
Internal rewinder for Compa II 162 thermal transfer version
9052970A
For rewinding small label rolls after printing inside the printer.
In dispensing mode, for rewinding the liner.
Max external diameter of label roll: 145 mm
Label winding: outside
Label rewinder PR 10
9252100
PR 10 for rewinding the labels after printing
Max external diameter of label roll: 210 mm
Max label width: 120 mm (for Compa II 10X)
Label winding: outside/inside
Core diameter: 40 mm on cardboard core or winding axis
76 mm on cardboard core using adapter
Product sensor Reflexion
9052796B
With the product sensor connected to the dispenser inputs/outputs, the print start can be released.
Rewinder plate for Compa II 162
9052972
Only for printers with dispenser
For rewinding labels internally despite the installed dispenser
Internal rewinder for Compa II 10x thermal version
9052875A
For rewinding small label rolls after printing inside the printer.
In dispensing mode, for rewinding the liner.
Max external diameter of label roll: 145 mm
Label winding: outside
Internal rewinder for Compa II 162 thermal version
9052975A
For rewinding small label rolls after printing inside the printer.
In dispensing mode, for rewinding the liner.
Max external diameter of label roll: 145 mm
Label winding: outside
Label rewinder PR 12
9252120
PR 12 for rewinding the labels after printing
Max external diameter of label roll: 300 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)
The rewinder has its own power supply.
Label rewinder PR 15
9252200
PR 15 for rewinding the labels after printing
Max external diameter of label roll: 210 mm
Max label width: 180 mm (for Compa II 162)
Label winding: outside/inside
Core diameter: 40 mm on cardboard core or winding axis
76 mm on cardboard core using adapter
Label rewinder PR 17
9252200
PR 17 for rewinding the labels after printing
Max external diameter of label roll: 300 mm
Max label width: 180 mm (for Compa II 162)
Label winding: outside/inside
Core diameter: 40 mm on cardboard core or winding axis
76 mm on cardboard core using adapter
The rewinder has its own power supply.
Signal lamp
9052790B
For displaying the current printer status.
Label unwinder PA 50A
9266050A
PA 50A for unwinding large label rolls
Max external diameter of label roll: 300 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)
WLAN
9052780B
WLAN card 802.11b/g WEP/WPA PSK (TKIP)
(Warning! Cannot be retrofitted: It is to be indicated for new orders.)
Additional toroidal 75 mm CPL for unwinder
7215060
For the use of 75 mm cardboard core instead of 40 mm (standard).