Carl Valentin Spectra II

High-speed performance in the 2nd generation

  • 6.5" Touch-screen display

  • Roll-to-Roll

  • Print speed up to 350 mm/s

Spectra II – industrial label printer

Our developers have once again done a great job: with the further development of the Spectra into the SPECTRA II, one of the quickest and most precise label printers has been optimised even further.


The first thing you see is the modern design line in which the 6.5" touch display, included as standard, is a striking new feature. It allows for intuitive manual operation: quick, direct and uncomplicated. The printing process is quick as well: with speeds of up to 350 mm/s and additional transfer tape optimisation, there are hardly any comparable label printers which can hold a candle to the Spectra II here. This innovation from Carl Valentin is thus the perfect solution for all industries in which quick, precise and high-quality printing results matter.

A wide variety of optional features such as roll-to-roll (rolls up to max 200 mm can be unwinded and rewinded internally), barcode scanner or WLAN round out the overall impression: equipped for practically any industrial infrastructure!

Accessories
Additional toroidal 75 mm CPL for rewinder
7215061

For the use of 75 mm cardboard core instead of 40 mm (standard).

Additional toroidal 75 mm CPL for unwinder
7215060

For the use of 75 mm cardboard core instead of 40 mm (standard).

Compact Flash Card 2 Gb 
3702014

2 GB Compact Flash Card

Cutter unit "Guillotine" for Spectra II 216
9088965A

The guillotine cutter permits cutting of labels up to 220 g/m².

Single cut, interval cut and final cut can be selected.

Connection set for rewinder and unwinder
9266090

For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.

Cutter unit for Spectra II 10X
9088860A

The half-rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

Cutter unit for Spectra II 16X
9088960A

The half-rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

Dispenser with photocell for Spectra II 10X
9088855

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

Dispenser with photocell for Spectra II 16X
9088955

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

Dispenser with photocell for Spectra II 216
9088958

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

Dispenser without photocell for Spectra II 10X
9088958

The dispenser unit is controlled by a manual switch, foot switch or an external control signal.

Dispenser without photocell for Spectra II 16X
9088950

The dispenser unit is controlled by a manual switch, foot switch or an external control signal.

Dispenser without photocell for Spectra II 216
9088953

The dispenser unit is controlled by a manual switch, foot switch or an external control signal.

Leporello guiding for Spectra II 10X
9088890

For the use of folded (zigzag) label material.

Leporello guiding for Spectra II 16X
9088990

For the use of folded (zigzag) label material.

Leporello guiding for Spectra II 216
9088992

For the use of folded (zigzag) label material.

Leporello guiding for Spectra II 16X
9088990

For the use of folded (zigzag) label material.

Dispenser inputs/outputs
9088785A

With 8 specified inputs and outputs, different functions of the printer can be released and operating conditions be shown.

Label photocell transmission + reflexion from above
9088740A

Label detection with transmission and reflexion from above (for black labels on the label).

Ultrasonic label photocell for Spectra II 103/104/106/108
9088896A

For transparent labels on transparent liner.

With extra charge for new printer (no retrofit possible).

Ultrasonic label photocell for Spectra II 107
9088897A

For transparent labels on transparent liner.

With extra charge for new printer (no retrofit possible).

Ultrasonic label photocell for Spectra II 160
9088997A

For transparent labels on transparent liner.

With extra charge for new printer (no retrofit possible).

Ultrasonic label photocell for Spectra II 162
9088996A

For transparent labels on transparent liner.

With extra charge for new printer (no retrofit possible).

Internal rewinder for Spectra II 103, 104, 106, 108
9088870A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 200 mm

Label winding: outside

Internal rewinder for Spectra II 103, 104, 106, 108
9088875A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 200 mm

Label winding: inside

Internal rewinder for Spectra II 107
9088871A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 200 mm

Label winding: outside

Internal rewinder for Spectra II 107
9088877A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 200 mm

Label winding: inside

Internal rewinder for Spectra II 16X
9088970A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 200 mm

Label winding: outside

Internal rewinder for Spectra II 16X
9088975A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 200 mm

Label winding: inside

Internal rewinder for Spectra II 216
9088973A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Label winding: outside

Internal rewinder for Spectra II 216
9088978A

For rewinding label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Label winding: inside

Label rewinder PR 12
9252120

PR 12 for rewinding the labels after printing

Max external diameter of label roll: 300 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

The rewinder has its own power supply.

Label rewinder PR 17
9252200

PR 17 for rewinding the labels after printing

Max external diameter of label roll: 300 mm

Max label width: 180 mm (for Compa II 162)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

The rewinder has its own power supply.

Additional toroidal CPL 75 mm assembly set PR 45
9266018

​For the use of 75 mm cardboard core instead of 40 mm (standard).

Label rewinder PR 45 II
9266014

PR 45 II for rewinding the labels after printing

Max external diameter of label roll: 270 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

Label unwinder PA 50A
9266050A

PA 50A for unwinding large label rolls

Max external diameter of label roll: 300 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

Ribbon save for Spectra II 107
9088840A

For a maximum utilization of transfer ribbon.

Ribbon save for Spectra II 10X Flat type
9088842A

For a maximum utilization of transfer ribbon.

Ribbon save for Spectra II 106
9088940A

For a maximum utilization of transfer ribbon.

Ribbon save for Spectra II 162 Flat type
9088942A

For a maximum utilization of transfer ribbon.

Scanner DS457& Holding fixture for Spectra II
9088900A

Low-cost camera scanner checks the readability of 1D and 2D bar codes - incl. holding fixture for Spectra II.

Printhead wear, transfer ribbon wrinkling or material flaws in the label can result in a bar code suddenly becoming unreadable. This scanner ensures that the freshly printed bar code is readable and high follow-up costs are avoided.

Scanner SICK CLV 622 & holding fixture for Spectra II
9088904A

Extremely rapid laser scanner constantly checks the readability of 1D bar codes - incl. holding fixture for Spectra II.

Printhead wear, transfer ribbon wrinkling or material flaws in the label can result in a bar code suddenly becoming unreadable. This scanner ensures that the freshly printed bar code is readable and high follow-up costs are avoided.

Scanner SICK ICR 620 E & holding fixture for Spectra II
9088902A

Extremely rapid and high-resolution camera scanner intermittently checks the readability of 1D and 2D bar codes - incl. holding fixture for Spectra II.

Printhead wear, transfer ribbon wrinkling or material flaws in the label can result in a bar code suddenly becoming unreadable. This scanner ensures that the freshly printed bar code is readable and high follow-up costs are avoided.

Tear-off plate above for Spectra II 16X
9088993

After terminating the print order the labels can be separated by hand.

WLAN
9088775A

WLAN card 802.11b/g WEP/WPA PSK (TKIP)

(Warning! Cannot be retrofitted: It is to be indicated for new orders.)

© 2017 par REDEMAC INC.

  • LinkedIn Social Icon
  • YouTube
  • Facebook Social Icon
  • Instagram