REDEMAC Inc
Carl Valentin Vario III
Bestselling device in already its third generation
-
Print speed up to 250 mm/s
-
Internal label rewinder (max Ø 100 mm)
-
Optional with 7" touch-screen display
-
Ethernet interface as standard
-
Optional with bar code scanner and WLAN (Warning! Cannot be retrofitted: It is to be indicated for new orders.)
-
Optional dispenser input/output of most recent generation
-
3-fold USB host for USB keyboard/stick and CF drive
Bestselling device in already its third generation
The Vario series, which has already proved successful for a number of years, has been revised both technically and visually and Vario III combines all the functions of a solid and extremely reliable label printer with excellent ease of use. Like its precursors, the new device also has all the well-known options such as the cutter unit, dispenser unit, external rewinder and scanner. A WLAN interface for radio data transfer can be installed as a new option.
The large, optional touch screen display is simple and comfortable to operate. Using a cursor, a mouse or something similar is unnecessary as thanks to modern technology the touch screen display is operated by finger like current smartphones or tablet PCs. As an environmentally friendly company, Valentin is aware of its responsibilities and manufactures the Vario III from recyclable components and materials. The series range also uses very little energy.
Accessories
Additional toroidal 75 mm CPL for rewinder
7215061
For the use of 75 mm cardboard core instead of 40 mm (standard).
Additional toroidal 75 mm CPL for unwinder
7215060
For the use of 75 mm cardboard core instead of 40 mm (standard).
Compact Flash Card 2 Gb
3702014
2 GB Compact Flash Card
Cutter unit
9056600
The guillotine cutter permits cutting of labels up to 240 g/m².
Single cut, interval cut and final cut can be selected.
Connection set for rewinder and unwinder
9266090
For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.
Dispenser inputs/outputs
9056785
With a maximum of 16 control inputs and outputs, different functions of the printer can be released and operating conditions be shown.
Dispenser long with photocell with locking device
9056565
The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.
The dispenser unit with extended dispenser edge is locked at the outside.
Dispenser with photocell
9056550
The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.
Dispenser with photocell with locking device
9056560
The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.
The dispenser unit is locked on the outside.
Dispenser without photocell with locking device
9056510
The dispenser unit is controlled by a manual switch, foot switch or an external control signal.
The dispenser unit is locked on the outside.
Dispenser without photocell
9055430
The dispenser unit is controlled by a manual switch, foot switch or an external control signal.
Supporting rolls for dispenser
9056570
For placing the dispensed labels up to the removal of the operator. For very high labels.
Supporting rolls short for dispenser
9056572
For placing the dispensed labels up to the removal of the operator. For medium high labels.
Label tightener
9055460
Necessary for material tension. Especially in backfeed mode to improve positioning with high print speed.
Leporello guiding
9055415
For the use of folded (zigzag) label material.
Voltage supply 115 VAC
9056784
Tension switch for countries with mains voltage of 115 Volt alternating current
Label photocell transmission+reflexion from above
9056998
Label detection with transmission and reflexion from above (for black labels on the label).
Label photocell transmission+reflexion from below
9056996
Label detection with transmission and reflexion from below (for black labels on the label).
Label photocell transmission 26 mm extended
9056992
Label detection with transmission
Scan point: 26 mm
Label photocell transmission 34 mm extended
9056994
Label detection with transmission
Scan point: 34 mm
Additional toroidal CPL 75 mm assembly set PR 45
9266018
For the use of 75 mm cardboard core instead of 40 mm (standard).
Label rewinder PR 12
9252120
PR 12 for rewinding the labels after printing
Max external diameter of label roll: 300 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)
The rewinder has its own power supply.
Label rewinder PR 45 II
9266014
PR 45 II for rewinding the labels after printing
Max external diameter of label roll: 270 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)
Tear-off plate
9055410
After terminating the print order the labels can be separated by hand.
Scanner DS457& Holding fixture for Vario III
9056900
Low-cost camera scanner checks the readability of 1D and 2D bar codes - incl. holding fixture for Vario III.
Printhead wear, transfer ribbon wrinkling or material flaws in the label can result in a bar code suddenly becoming unreadable. This scanner ensures that the freshly printed bar code is readable and high follow-up costs are avoided.
Scanner SICK ICR 620 E & holding fixture for Vario III
9056902
Extremely rapid and high-resolution camera scanner intermittently checks the readability of 1D and 2D bar codes - incl. holding fixture for Vario III.
Printhead wear, transfer ribbon wrinkling or material flaws in the label can result in a bar code suddenly becoming unreadable. This scanner ensures that the freshly printed bar code is readable and high follow-up costs are avoided.
Label unwinder PA 50A
9266050A
PA 50A for unwinding large label rolls
Max external diameter of label roll: 300 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)
WLAN
9056780
WLAN scanner 802.11b/g WEP/WPA PSK (TKIP)
(Warning! Cannot be retrofitted: It is to be indicated for new orders.)