top of page
Evolabel
Printers
Applicators

Evolabel e-Tamp Applicator

The  latest generation tamp applicator

  • High-speed

  • Reduced weight

  • Increased flexibility and safety

Tech Info
Evolabel e-Tamp Applicator

 

The Evolabel e-Tamp is the latest generation tamp applicator. Rigid but light aluminum profile allow various version stroke lengths, from 150 mm up to 650 mm, yet with a perfectly maintained label precision. The fact that the e-Tamp is stepper motor driven instead of pneumatic, also reduce weight and increase flexibility and safety. The exact stroke length is simply set from the graphic user interface of the printer and can change automatically when changing from one type of product to another. The stepper motor driven solution makes the e-tamp a very safe tamp applicator - put your hand in front of the applicator and it automatically turns back to its home position.

Evolabel

Evolabel

Watch Now
Side, top, front, end... 
 

The long stroke length in combination with exact stepper motor control, makes the Evolabel e-Tamp suitable not only for side and top labeling on various size boxes, but also labeling the front or end of the box. For front or end labeling, the system is mounted in an angle above the conveyor and an angled version of the patented applicator plate holds the label vertically.

Specifications 

Evolabel e-Tamp applicator, applies labels on various size boxes, from the side, top, front or end side of the box.

 

4 models with different maximum apply distance are available; 150 mm, 300 mm, 500 mm and 650 mm. The apply distance can be linked to the product article data base stored in the printer, eliminating any adjustments on the print & apply unit for the operator when changing from one product size to another.  

 

The label size can be all the way from 30x20 mm up to 118x200 for the D43 and T43 and from 80x80 mm up to 178x210 mm for the T63 printer model.

 

With several independent and integrated vacuum ejectors, the patented applicator plate allow different size labels, gives safe and accurate label apply and minimized air consumption.  The capacity depends on label length and stroke length.

The mechanical, electrical and pneumatic interface between the Evolabel applicators and printers are all the same plug-and-play standard.

Applicator Model                               e-Tamp Applicator                                  

  

Suitable printer models                         D43, T43, T63

Minimum label size                                D43, T43: 30x20 mm
                                                              T63: 80x80 mm

Maximum label size                               D43, T43: 118x200 mm
                                                               T63: 178x210 mm

Maximum apply distance                       4 models: 
                                                               0 - 120 mm
                                                               0 - 270 mm
                                                               0 - 470 mm
                                                               0 - 620 mm

Apply speed                                          800 mm/s

Air supply                                               6 bar, clean and dry

Communication                                      CANopen​

bottom of page