Redemac Inc.
Vita II

Additional toroidal 75 mm CPL for rewinder
7215061
For the use of 75 mm cardboard core instead of 40 mm (standard).
Additional toroidal 75 mm CPL for unwinder
7215060
For the use of 75 mm cardboard core instead of 40 mm (standard).


Compact Flash Card 2 Gb
3702014
2 GB Compact Flash Card
Connection set for rewinder and unwinder
9266090
For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.


Cutter unit "Guillotine"
9048650A
The guillotine cutter permits cutting of labels up to 220 g/m².
Single cut, interval cut and final cut can be selected.
Cutter unit "Guillotine" with antistatic brush (on request)
9048655
The guillotine cutter with antistatic brush permits cutting of labels up to 220 g/m².
Single cut, interval cut and final cut can be selected.


Dispenser inputs/outputs
9048786A
With a maximum of 16 control inputs and outputs, different functions of the printer can be released and operating conditions be shown.

Dispenser with photocell
9048550A
The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.
Dispenser without photocell
9048500
The dispenser unit is controlled by a manual switch, foot switch or an external control signal.

Additional toroidal CPL 75 mm assembly set PR 45
9266018
For the use of 75 mm cardboard core instead of 40 mm (standard).


Label rewinder PR 45 II
9266014
PR 45 II for rewinding the labels after printing
Max external diameter of label roll: 270 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)


Label rewinder PR 49
9248010
PR 49 for rewinding the liner in dispensing mode.
Max external diameter of label roll: 180 mm
Label winding: inside
Core diameter: 40 mm (optional 75 mm)


Scanner DS457 & holding fixture for Vita II
9048900A
Low-cost camera scanner checks the readability of 1D and 2D bar codes - incl. holding fixture for Vita II.
Printhead wear, transfer ribbon wrinkling or material flaws in the label can result in a bar code suddenly becoming unreadable. This scanner ensures that the freshly printed bar code is readable and high follow-up costs are avoided.
Label unwinder PA 50A
9266050A
PA 50A for unwinding large label rolls
Max external diameter of label roll: 300 mm
Label winding: outside/inside
Core diameter: 40 mm (optional 75 mm)


WLAN
9048780A
WLAN card 802.11b/g WEP/WPA PSK (TKIP)
(Warning! Cannot be retrofitted: It is to be indicated for new orders.)